“3” Mifi using a not so ‘tamper evident’ security label

 the "security label" in place

the “security label” in place

We recently bought a Three MIFI unit for remote web access, which came packaged above with a so called “tamper evident” label saying “I’m secure. Check contents if seal broken or VOID displayed”. Ummm.

the seal removed intact

the seal removed intact

well it took seconds using a simple technique to remove.

and reapplied again

and reapplied again

and here is is reapplied.  You’d have to have a very careful eye to see any change.  In fact I rushed this a bit and could have done a better job  if I’d have had my “tools” in the office at the time.

a Label Lock applied

a Label Lock applied

Contrast this product with our stock Label Lock product – OK, its a bit big for this application, but we do customise them on request.

a Label Lock removed leaving a permanent change on the box AND the label

a Label Lock removed leaving a permanent change on the box AND the label

And a Label Lock removed, using the same technique which removed the white “security ” label above.  Notice any difference?  I think I know which one does the job it is supposed to, and which one does not.  If you need to secure a box from pilfering, then we recommend you use a product upto the job – not one that is just “all talk”.